Folded Sanding Fleece Ring
Folded sanding fleece ring
ABRRG-FLC-100/COARSE-D125MM-M14
ZEBRA
Register now and access more than 125,000 products
Suitable for use with polishing machine or with infinitely variable, adjustable angle grinder or fillet seam grinder
With M14 thread
Virtually shoulder-free line matting on all materials
Folded abrasive fleece
Extremely long service life compared with ordinary burnishing rollers
Double impregnation
Easy to assign fineness structure
Colour coding
The circumferential speed is specified by the machine used, though max. 3,200 rpm. At high rotation speeds a coarse grain acts like a finer grain and at low rotation speeds a fine grain acts like a coarser one. Use tools with a low contact pressure; high contact pressure leads to premature wear. With insufficient chip removal, do not increase the contact pressure, but instead use a coarser grain.
Datasheets(X)
- Shadow-free matting, burnishing, polishing and for matching "pre-sanded" metal sheets, achieving impressive surfaces, cleaning oxide coatings and removing tempering colour.
- Materials to be processed: Forged steel, malleable iron, grey cast iron, carbon steel, deep drawing steel, steel strip, injection-moulded zinc, non-ferrous metals, Cr-Ni and other stainless steels, as well as wood.
Diameter (Ø) | 125 mm |
Width | 50 mm |
Connection thread | M14 |
Design | Coarse |
Grid size | 100 |
Colour | Red |
Max. rotation speed | 3200 rpm |
Last viewed
MAG wire WÜRTH G3Si1
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
S1 shoe with composite
Hexagon socket screwdriver For bolts and nuts
Die stocks DIN 225
Twist Drill bit HSCO DIN 338 TYPE RN
Battery starter P12-2500
Champion without protection
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
2-component special mortar WIT-P 200