HIGH-PRESSURE CLEANER HDR 180 COMPACT
Cold wtr high-press cleanr HDR 180 COMPACT CLASSIC
CLNDEV-(HDR 180 COMPACT CLASSIC)-PLG/F
Register now and access more than 125,000 products
Work comfortably thanks to the easy-to-store high-pressure hose
The integrated hose drum ensures that the hose is always in the right place, minimizing the risk of accidents.
Solid ceramic plunge
High resistant to lubricants, friction, and temperature.
Triplex plunger pump
Operating pressure of 180 bar, 800 hours lifespan
Water inlet filter
Avoids intake of sediment or other particles in the water protects the pump, extend the life.
Self-prime function
Draws water from static sources such as tanks, drums, barrels, etc.
3800ml Integrated detergent tank and self-suction
Full spread on 14 sedan cars with one fill (**average quantity. May vary depending on the concentration of the shampoo).
Self-Suction bottle
Full spread on 3-4 sedan cars (average) with one fill of 1000ml integrated detergent tank.
05 Nozzles Tips
Different pressure and spray width for fatigue free working.
Thermal protector
Protects the motor from overloading.
Total stop system
Relieving the pressure prolongs the service life.
1000 ML attachable foam jet bottle
Rich foam and good surface coverage. Adjustable angle and pressure.
10m hose reel
Wide operating range and easy storage.
This model was developed for medium-duty application and is aimed to be used on an average of 2-4 hours per day. Failure to comply with this recommendation may lead to premature motor wear of the original 800 hours lifespan.
Operation with detergent: detergent can only be added when the device is operated in low pressure mode.
a) When using detergents, the material data safety sheet issued by the detergent manufacturer must be adhered, especially the instructions regarding personal protective equipment.
b) Remove the cap of the clean detergent bottle. Gently pull the onboard detergent tank out of its storage position.
c) Fill the tank with detergent designed specifically for use with pressure washers.
d) Push the detergent bottle with the opening pointing downwards into the connection for the hose clean detergent.
Datasheets(X)
Nominal voltage | 230 V |
Power input | 2400 W |
Max. pressure | 180 bar |
Operating pressure | 120 bar |
Min./max. feed quantity | 6.0-7.4 l/min |
Hose length | 10 m |
Length | 420 mm |
Width | 266 mm |
Height | 313 mm |
Weight of machine | 21.7 kg |
Cable length | 5 m |
SPRLANC-(F.HDR 170/180/210 CLASC)-L400MM
NOZ-SET-(F.HDR 170/180/210 CLASSIC)-5PCS
HOSE-(F.HDR 180/210 CLASSIC)-L3M
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
Last viewed
Steel zinc plated yellow full thread cs head Z
Twist drill assortment HSS DIN 338 type RN TiN head
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Extension Lead H05VV-F3G1.5mm2 cable With 1 outlet
Electronic welding protection
7-pin connector 12 V
Yellow zinc-plated steel rivet nut
Rust remover
Maintenance set For 1/4 inch and 3/8 inch reversible ratchet with turntable
Professional tool box