SPEED cutting disc for aluminium and non-ferrous metals
CUTDISC-SP-YELL-ALU-SR-TH1,0-BR22,2-D115
Register now and access more than 125,000 products
- Faster and more effective due to very short cutting times
- Very thin for precise and almost burr-free cuts
- The very thin design also ensures very clean and cool cutting surfaces
- High protection against breakage
- The low effort required ensures comfortable working and is gentle on the user and the power tool
- ZEBRA quality for particularly high demands
- Store in a dry place, at 20 °C room temperature
- Always wear appropriate protective clothing while working
- Always use an appropriate protective cover when performing cutting work
- Only use undamaged discs
- Do not jam/tilt the discs during cutting. Increased risk of breakage!
- Ensure correct contact pressure
- Always clamp cutting discs (straight design) with the metal ring towards the power tool
- For further information, please refer to the package insert
Complies with the most demanding safety requirements of European Standard EN 12413 and the OSA (the Organization for the Safety of Abrasives)
Datasheets(X)
- Suitable for aluminium, aluminium alloys and other non-ferrous metals such as copper, brass, bronze etc.
- Particularly effective at cutting thin-walled pipes and profiles (e.g. window profiles), thin metal sheets, roof coverings, roof gutters etc.
Versatility (points system) | 1 of 4 points |
Service life (points system) | 3 of 4 points |
Cutting ability (point system) | 4 of 4 points |
Handling/user-friendliness (point system) | 3 of 4 points |
Cut quality (point system) | 3 of 4 points |
Diameter x thickness | 115 x 1.0 mm |
Bore hole | 22.23 mm |
Design | Straight |
Max. rotation speed | 13300 rpm |
Max. circumferential speed | 80 m/s |
Material to be processed | Non-ferrous metal |
Last viewed
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Silicone spray for plastic, rubber and metal parts - both inside and outside
Polishing pads
1/2 inch impact socket wrench insert hexagon, metric, short
Tungsten carbide bur with MX teeth
Polishing pads
1/2 inch socket wrench insert, metric
Engine sealing compound flange sealant, Neutral silicone
Vinyl chemical and moisture protective glove