Adhesive Grease
Adhesive grease
ADHGRSE-300ML/200G
Register now and access more than 125,000 products
- Great adhesion power and resistance to pressure resulting from compression
- Low drip rate and with increasing friction, viscosity increases progressively
- Grease goes from a liquid state to a paste state, due to the evaporation of the solvent
- Lubricant specially developed for parts exposed to high pressure, impact and vibration
- Resistant to fresh water, salt water and acids
- Prevents corrosion
- Does no attack rubbers, silicones, and plastics
- Free from silicone, resin and acids
- Reduces friction and noise emission
- Resistant up to 200°C
Datasheets(X)
- Vehicle hinges, automotive seat rails, sunroofs, locks, suspension bushings, steering racks, cardan crosses, gears, etc.
- Shielded bearings, chains, bushings, bearings, reducers, steel cables, linear guides, rollers, etc.
- Motorcycle lever, bicycle chains and motorcycle chains, retractable roof, spring beam and pick-up
- Transport systems, such as rails and cables
- Sliding surfaces
- Pins and hinges
- Gears
- Parts subjected to high pressure, impact and vibration
- Slides and hinges in carpentry
- Gears for square machines and edge band gluers
- Furniture factories: on the cart wheels and steel rails where production carts run
Chemical basis | Polymer |
Oil basis | Synthetic |
Colour | Yellowish |
Smell/fragrance | Characteristic |
Max. temperature resistance | 200 °C |
Flashing point conditions | 0 - not applicable |
Conditions for viscosity of oil basis | 0 - not applicable |
Silicone-free | Yes |
Acid-free | Yes |
Resistance against | Freshwater, Salt water, Acid |
Contents | 300 cm³ |
Weight of content | 200 g |
Shelf life from production | 2 Years |
Last viewed
Steel zinc plated yellow full thread cs head Z
ALLEN KEY HEXAGONAL (HEX) SET 9 PIECES – LONG BLADE
Diluted organic anti-freeze 30%, -18°C
Helical insert W.TEC® INSERT COIL Free Running
ECOLINE cleaning paper
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
TX SCREWDRIVER
1/2 inch socket wrench insert, metric
W-TEC® INSERT COIL — universal screw-in tool
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe