Paintable body sealant - BDYWRKSEAL-SPREADABLE-1,2KG

Paintable body sealant

Name: Paintable body sealant
Brand: Würth
SKU: 0892010

Paintable bodywork sealant
BDYWRKSEAL-SPREADABLE-1,2KG

Art.-no. 0892010

EAN 4056807915609

All versions

Similar products

Prices for customers after login

Paintable body sealant

Art.-no. 0892010

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: +598 2288 0000

Sealant for true-to-original reproduction of the brushed texture from the factory.

Fast drying

Can be painted over after one hour

Silicone-free

Permanently elastic

Easy to spread

Suitable for application with the brush

Resistant to water and mineral oil

Adheres well to bare, primed and painted metal

Basis: Nitrile rubber

Notice

The product is not UV-resistant, but can be overpainted for protection against UV radiation.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Suitable for sealing metal joints, scratches, overlaps and spot weld seams on front and rear skirts, the boot floor, the entire undercarriage, in the passenger compartment, on the sidewalls and on the wheel wells.

Instructions

The base material must be clean, dry and free of grease. For more information, please refer to the technical data sheet.

Chemical basis	Nitrile natural rubber
Colour	Light grey (bright grey)
Smell/fragrance	Characteristic
Min./max. temperature resistance	-25 to 80 °C
Max. short-term temperature resistance	150 °C
Resistance against	Mineral oils, Water
Shelf life from production/conditions	24 Month / well-ventilated storage area, 20°C
Min. flashing point	-20 °C
Silicone-free	Yes
Recoatable/Can be painted over	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.