W-MAX PU structural adhesive for gutters
For detailed information, other images and documents, please select individual articles from the following table.
W-MAX PU structural adhesive for gutters
Solvent-free single-component sealant based on hybrid polymer. High performance, for bonding and sealing metal and sheet metal gutters.
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Low VOC, free from solvents and isocyanates.
- Neutral odour and non-corrosive reaction on metal surfaces and mirrors.
- Excellent physical and mechanical properties.
- Cohesive adhesion on various smooth and porous substrates, including wet surfaces, without the need for primers.
- Easy to apply, highly durable and resistant to chemicals.
- Does not run when applied vertically and does not exude oil that causes staining.
- Resistant to inclement weather (climate factors, UV and ozone).
- Can be painted over after curing (we recommend performing a preliminary test).
Notice
- Do not use in environments with exposure to water or while it is raining.
- Do not use for structural bonding.
- Do not use in expansion joints.
Application area
Gutters, flashings, tiles, galvanised materials, wood, metal and fibre cement.
Instructions
- The application surfaces must be clean and stable.
- Cut the tip of the cartridge.
- Cut the applicator nozzle at an angle of 45º to produce the desired thickness.
- Screw the nozzle onto the applicator cartridge and place it in the applicator gun.
- Apply the adhesive in the form of a bead around the entire edge, ensuring a perfect seal.
- Once positioned correctly, apply pressure for at least 15 minutes; after this time, the part may be moved, but should not bear load.
- Full curing takes 24 hours depending on the weather, amount of adhesive and weight of the parts to be fixed.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!