Silicone spray grease

Name: Silicone spray grease
Brand: Würth
SKU: 0893223

Silicone spray grease
SILSPRGRSE-500ML

Art.-no. 0893223

EAN 4056807235684

All versions

Prices for customers after login

Silicone spray grease

Art.-no. 0893223

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: +598 2288 0000

Glass-like transparent, extremely lubricating and insulating silicone grease that displaces water

Good moisture and corrosion protection due to extremely good water-displacing effect

Excellent sliding and lubricating properties on almost all base materials

Very high level of electrical resistance

Excellent insulating effect

Free from acids and resin

Colour: Transparent when sprayed on; a cloudy glass-like film remains once it has flashed off

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Suitable for lubricating door pins, slide rails, door and furniture hinges, drawers, and plastic, sliding roof and seat guides etc. Also suitable for lubricating switches, electrical wiring and sensitive components to protect them against moisture and corrosion.

Instructions

Shake the product before use. Spray a thin coat onto the surface to be treated and allow the solvent to flash off.

Chemical basis	Polydimethylsiloxane
Colour	Transparent, translucent, opaque
Contents	500 ml
Acid-free	Yes
Resin-free	Yes
Density	0.895 g/cm³
Density/conditions	0.895 g/cm³ / at 20°C
Shelf life from production	36 Month
Weight of content	324.4 g
Max. temperature resistance	300 °C

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.