W-MAX INTERIOR ACRYLIC SEALANT, 280 ML
ARCYSEAL-IN-(W-MAX)-WHITE-280ML
Art.-no. 5982173010
EAN 4099618982149
Register now and access more than 125,000 products
- High stability after curing.
- High-strength.
- Accepts water-based paint after curing.
- Resistant to UV rays.
- Good flexibility, excellent adhesion and impermeability.
- Internal use.
- Can be sanded and painted.
- Easy to apply.
- Do not use the product as a structural adhesive/sealant.
- Do not use the product in direct contact with liquids or solvents during the curing process.
- For applications subject to physical deformation and contact with water; for sealing aquariums and drinking water tanks.
- Not recommended for outdoor use.
Datasheets(X)
- Used for sealing construction products, metal, wood, PVC, aluminium frames, backfilled wall repairs, insulation and waterproofing materials.
- Suitable for sealing toilets, windows, cracks and fissures; for sealing wooden or metal frames, gaps between elements such as skirting boards and hydraulic, pneumatic or ventilation lines that pass through walls and floors.
- Can also be used in low-motion joints in walls, ceilings or prefabricated elements (usually internal).
- Application surfaces should be clean and free from dust, oil and grease.
- Open cracks for repair with the appropriate tools to create a V-shaped profile.
- Maximum application thickness is 15 mm and depth is 10 mm.
- Isolate the area to be sealed with adhesive tape. Remove the adhesive tape immediately after finishing.
- A 2 mm bead cures in 24 hours. Do not allow contact with water while the product is curing.
- Sand the product before painting. Wait for the product to fully cure before painting. If the product is painted before it has completely cured, stains may appear in the paint or the product may show through the paint, commonly known as "surfactant leaching".
Colour | White |
Contents | 280 ml |
Chemical basis | Benzisothiazole |
Density | 1.62 g/cm³ |
Smell/fragrance | Characteristic |
Continuous motion absorption | 2 % |
Shore A hardness | 10 |
Min. breaking elongation | 100 % |
Full curing speed | 1.8 mm/min |
Fully hardening/curing conditions | 20°C and 50% relative humidity |
Min. skin-formation time | 15 min |
Conditions for skin-formation time | at 20°C |
Min./max. temperature resistance | -10 to 80 °C |
Min./max. processing temperature | -40 to 80 °C |
Ultraviolet resistance | Yes |
Coating compatibility | Yes |
Recoatable/Can be painted over | Yes |
Surface pre-treatment required | Surface must be clean, dry and free from rust and grease. |
Mixing ratio | Mixture of 1K paint container with universal dilution. Dilution adjustment depending on the layer thickness 0-20 vol. % |
Shelf life from production/conditions | 12 Month / at 5°C to 25°C |
Last viewed
Stainless steel impact scraper
S1 shoe with composite
Sealing ring, aluminium, shape A
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
COMBINATION WRENCH - FLAT
Steel zinc plated yellow partial thread cs head Z
Shrinking burner gas, accessory
Screwdriver slotted striking cap with hexagon shank
SCREWDRIVER PH (PH)
Point chisel SDS-Plus Red Stripe